Panasonic Lumix DMC-FZ50 Operating Instructions Manual page 74

Advanced
• If you are setting the home area for the
second time etc., the screen returns to the
screen shown in step
[MENU/SET] to set your home area.
Press [MENU/SET] again to close the
menu.
∫ Setting the travel destination area
1
(Perform steps
1 Press 3 to select [DESTINATION] and
then press [MENU/SET] to set.
WORLD TIME
--:-- --. --.----
CANCEL
A: Depending on the setting, the time at
the travel destination area or the
home area is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen
above.
2 Press 2/1 to select the area the travel
destination is in and then press
[MENU/SET] to set.
10:00
Seoul
Tokyo
+14:00
SELECT
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time
difference from the home area is
displayed at the bottom left of the
screen.
• If daylight saving time [
the travel destination, press 3. (The
time advances by one hour.) Press 3
again to return to the original time.
74
VQT0X92
3
after you press
2 3
, and .)
DESTINATION
HOME
MENU
SET
MENU
SELECT SET
0:00
MENU
CANCEL
SET
MENU
SET
] is used at
• The names of major cities in the
selected area are displayed. Also, the
time difference between the selected
area and the home area is displayed on
the bottom left of the screen. (Refer to
P75 for information about the names of
the major cities that are displayed.)
3 Press [MENU/SET] to close the menu.
SETUP
CLOCK SET
WORLD TIME
CUST.SET MEM.
MONITOR
GUIDE LINE
SELECT
• The icon changes from [
after setting the travel destination.
• Return the setting to [HOME] when the
vacation is finished by performing steps
1 2 3
and then steps 1 and 2 of
, ,
"Setting the home area [HOME]".
• If you cannot find the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
/
1
5
MENU
SET
n
0
MENU
EXIT
] to [ ]