Miele K 34272 iD Operating Instructions Manual page 70

Building in the appliance
^ Tighten all screws again.
^ Replace top cover o, and click it into
place.
^ Replace side covers p, making sure
you hear them click into place.
70
To make sure the appliance is
correctly fitted:
– The doors must close properly.
– The doors must not touch the
housing unit.
– The seal at the top edge of the
handle side must fit properly.
^ To double check place a torch in the
appliance and close the door.
Turn the lights out in the room. If you
can see any light shining out from the
sides double check the installation.