Rena Ware AQUA II 5000 User Manual page 14

III. Installation
INSTALLATION OPTIONS:
TO ADJUST THE LENGTH
OF THE TUBING (you will need
a sharp knife)
1. To shorten the length of the
tubing, remove the tubing (see
figure 13) from the manifold,
then carefully remove the
tubing inserts from both tubes.
With a knife, cut the tubing to
the desired length (see figure
14). Then, replace the tubing
inserts.
2. Insert the tubing into the
manifold, making sure to
connect the inlet tube in
the gray receptacle of the
manifold (see figure 15).
WALL OR UNDER THE
COUNTER INSTALLATION
An optional mounting bracket
may be available to allow your
AQUA 3 II to be mounted to a
wall or under the counter. Contact
your local Rena Ware Customer
Service Office.
4
(continued)
fig. 3
fig. 4
fig. 5