Download  Print this page

Advertisement

Flip Connect
Cisco 232D & 302D
User Guide
_-
Flip Solutions Ltd t/a Flip Connect
Unit 5/6, 29 Mill Lane, Welwyn
Hertfordshire, AL6 9EU
020 3056 5060
0870 421 5411
support@flipconnect.co.uk
www.flipconnect.co.uk

Advertisement

Table of Contents

   Related Manuals for Cisco 232D

   Summary of Contents for Cisco 232D

  • Page 1 Flip Connect Cisco 232D & 302D User Guide Flip Solutions Ltd t/a Flip Connect Unit 5/6, 29 Mill Lane, Welwyn Hertfordshire, AL6 9EU 020 3056 5060 0870 421 5411 support@flipconnect.co.uk www.flipconnect.co.uk...
  • Page 2: Table Of Contents

    User Guide | Cisco 232D & 302D | 02/07/2014 Contents Introduction ......................................... 2 How to set up the Polycom Cisco 232D and 302D ............................ 3 Using your phone ......................................3 Hold Call ........................................... 3 Resume Call ........................................3 Redial a call ........................................3 Voice Mail .........................................
  • Page 3: Introduction

    User Guide | Cisco 232D & 302D | 02/07/2014 Introduction Cisco 232D and 302D This user guide will help you to navigate and use your new DECT handset and base station. It will give you an overview of your phone, and walk you through tasks so you can successfully use your phone to perform basic and advanced phone functions.
  • Page 4: How To Set Up The Polycom Cisco 232d And 302d

    User Guide | Cisco 232D & 302D | 02/07/2014 How to set up the Polycom Cisco 232D and 302D The handset and base station will arrive pre-configured and simply needs to be connected to the internet and powered up. Your Administrator or installer should know how to do this for you. There are some network/router level settings that must be applied, or the Horizon service will not work - for further details on these please refer to the Horizon user guide.
  • Page 5: Intercom Feature

    You can configure up to 100 private handset, and can answer the call or ignore the call. contacts and 50 shared contacts on the Cisco SPA302D. Note: LDAP-Corporate directory search is not available on this particular device.
  • Page 6: Configuring Phone Settings

    You can configure the amount of time that the handset display screen remains lit before it is turned off to conserve battery power. Date/Time: The handset date and time is synchronized with the Cisco SPA232D. You can also enter the date and time manually from the handset. Handset Settings: A unique handset name can be defined which is reflected in the upper right corner of the display.
  • Page 7: Upgrade The Handset (spa 302d) Software

    Press Reset to reboot the handset. Note 1: If the upgrade fails, press Reset to reboot the handset. Check the status lights on the Cisco SPA232D to make sure the unit is powered on and functioning. Repeat the upgrade.

This manual is also suitable for:

302d

Comments to this Manuals

Symbols: 0
Latest comments: