Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AURES OLC 10.1
Summary of Contents for AURES OLC 10.1
- Page 1 User Manual Version 1.0 March 2014 OLC 10.1...
- Page 2 Copyright 2014 All Rights Reserved Manual Version 1.0 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
-
Page 3: Important Safety Instructions
Safety IMPORTANT SAFETY INSTRUCTIONS To disconnect the machine from the electrical Power Supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. Read these instructions carefully. - Page 4 CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions.
-
Page 5: Revision History
Revision History Revision Date Description V1.0 March, 2014 Release... - Page 6 Table of Contents 1 Item Checklist ................1 2 System View & Dimension............1 3 Specification................2 4 Driver Installation..............3...
-
Page 7: Item Checklist
Item Checklist a. Standalone monitor with USB cable b. Manual CD attached System View & Dimension... -
Page 8: Specification
Specification Item Description Model OLC 10.1 Monitor Display size 10.1’ Brightness 250nits Resolution 1024 x 600 Tilt angle 0~90 degree Interface EMC & Safety FCC/CE Class A, LVD Operating temperature C ~ 40 C (32 F ~ 104 Storage temperature... -
Page 9: Driver Installation
Driver Installation To download the most recent drivers and utilities, and obtain advice regarding the installation of your equipment, please visit the AURES Technical Support Website: www.aures-support.fr (French) www.aures-support.fr/UK (English) www.aures-support.fr/GE (German) Make sure to connect the USB cable and begin the installation after your system has booted. - Page 10 When setup is finished, a monitor icon is created in the system tray at the bottom of the monitor screen, and the information for the installed USB monitor is displayed. Click the monitor icon to display a list of connected USB monitors. Select the monitor for which you want to configure the display settings.
- Page 11 After the installation, you can also check the configuration in the computer management. Click the Device Manager and the installed USB display will be displayed.
Need help?
Do you have a question about the OLC 10.1 and is the answer not in the manual?
Questions and answers