GE PP9830 Owner's Manual & Installation Instructions page 21

INSTALLING THE COOKTOP
11
INSTALLING THE BLOWER PLENUM
TO THE COOKTOP
Slide the plenum, with the blower opening on the left, into
the opening in the bottom of the cooktop. Push up on the
plenum until the stops on the plenum contact the bottom of
the cooktop, and snap the plenum into place. (You may have
to move the plenum back and forth to work it into place.)
Secure the plenum to the bottom of the cooktop, on each
side, using the four (4) screws provided. Further secure the
plenum to the cooktop, from the top side, using the two
screws (2) provided.
49-80635-1
Installation Instructions
Install 2 screws
Install 4 screws
12
INSTALLING THE BLOWER
TO THE PLENUM
Orient the blower discharge opening to match the ductwork
in Steps 6 and 7. Slide the four threaded studs on the side
of the blower housing into the four holes on the side of the
plenum.
NOTE: See Step 13 for installing the transition duct to the
blower. It may be easier to install the transition duct to the
blower before installing the blower to the plenum.
From the vent opening in the top of the cooktop, fasten the
blower assembly securely to the plenum with four (4) nuts.
4 Nuts
( / "
7
16
socket
required)
21