Setting Cruise Control; Resuming A Set Speed - Cadillac STS 2011 Owner's Manual

T (Set/Decrease): Press to set the speed or to
decrease the speed when cruise is already active.
(Cancel): Press to disengage cruise control without
erasing the set speed from memory.

Setting Cruise Control

If the cruise button is on when not in use, it could get
bumped and go into cruise when not desired. Keep the
cruise control switch off when cruise is not being used.
1. Move the cruise control switch to on.
2. Get up to the speed desired.
T
3. Press at the end of the lever and release it.
4. Take your foot off the accelerator pedal.

Resuming a Set Speed

If the cruise control is set at a desired speed and then
the brakes are applied, the cruise control is disengaged
without erasing the set speed from memory.
Once the vehicle speed reaches about 40 km/h
(25 mph) or more, move the cruise control switch briefly
R S
from to . The vehicle returns to the previous set
speed and stays there.
If the switch is held at resume/accelerate the vehicle
keeps going faster until the switch is released or the
brake is applied. Do not hold the switch at resume/
accelerate, unless you want the vehicle to go faster.
This light on the
instrument panel cluster
comes on while cruise
control is on.
4-13