Getting Started; Inserting The Memory Card - JOBO Smartcam Nano User Manual

2 Getting started

2.1 Inserting the memory card

1. Open the waterproof cover of the USB / Memory card slot.
2. Insert the memory card with the gold contacts facing the front
of the device. Push the memory card until it clicks into place.
3. Make sure the waterproof cover of the USB / Memory card slot
is sealed tightly, to achieve normal activity waterproofing.
4. To remove the memory card, push to eject the memory card
out of the slot.
Note:
1. Do not remove or insert the memory card when the device is turned on. This may damage
the device and memory card.
2. Please use a Class 10 or higher rating Micro SD card, max up to 32GB.
3. Please format the micro SD card before initial use.
9