JOBO Smartcam Nano User Manual page 26

equipment will automatically disable Wi-Fi and exit the
Life Cam App).
• • • • Deactivate power saving mode: the equipment is
continuously in standby.
6. Touch
automatically on the camera device.
7. Touch
Note:
1. The setting of Time lapse is an approximate time with a tolerance of about 1s.
2. Time lapse function stops when the memory is fully used or equipment is out of power. It is
suggested that you calculate the number of pictures in advance or activate power saving
mode before starting Time lapse operation.
3. When the Time lapse interval setting is less than 10s, the power saving mode cannot be
enabled.
4. When playing video footage recorded in Time lapse mode, the playback speed (picture per
second) will be in accordance with the frame rate setting.
5. Prior to recording, you may set Rotate View to alter the viewing angle of the recorded
picture or video. See Using the Rotate View ( 5.1.1).
26
to start shooting photos, the file will be saved
again to stop.