Wi-Fi Connecting - JOBO Smartcam Nano User Manual

3.2 Wi-Fi connecting

1. Press the Power button to switch on the equipment.
2. Press the Wi-Fi button to activate the wireless network.
3. Using the Wi-Fi function of the mobile device, search for the
equipment ID from the list. Each device has a unique ID no.:
i3XXXXXX (if the last 2 digits are the same as the last 2 digits
of your password, your device corresponds.)
4. Select and
numeral/letter on your LCM display twice will give you the Wi-Fi
password. E.g., if LCM display shows "1234", you Wi-Fi
password will be 12341234.
For iOS / Android Users:
Using the mobile device [Settings] → [Wi-Fi] → [Select device
ID no.:i3XXXXXX] → [Enter the password] → [Connecting]
5. Execute the Life Cam App
, indicating the connection is established.
Note:
1. Make sure the Wi-Fi function of the equipment is activated and the mobile device is
receiving Wi-Fi signal before executing the Life Cam App, or the App will be exited.
2. The mobile device shall be within a maximum of a 10m distance from the equipment without
any buildings in between.
3. When the Wi-Fi function of the equipment is activated for 3 minutes without connecting with
your mobile device, or the connection is disconnected, the equipment will automatically stop
the Wi-Fi function and you will need to re-activate the Wi-Fi function.
4. We suggest that you should set the correct date and time for your mobile device before
using the equipment, so that the recorded video will be consistent with the date and time
settings of the mobile device.
5. After connecting the mobile device with the equipment, all the mode switch, Record and
Wi-Fi operation buttons of the equipment will be inoperable; all the operations shall be
carried out via the Life Cam App.
6. The language of the Life Cam App will be consistent with that of your mobile device, it shall
be the default language if it is not the built-in one.
18
input Wi-Fi password (repeating
, device LCM display will show
the 4