HSN_MultiChopperManual2011:HSN_MultiChopperManual2011
Operations
CHOPPING
1
Carefully remove the plastic cover from the blade.
IMPORTANT: Use caution when handling blades as they are
extremely sharp. Always hold blades by the plastic stem,
not the blade itself.
2
Place the blade in the center of the chopping bowl.
3
Add food to be processed.
4
Place the cover on the chopping bowl.
5
Insert the motor housing onto the cover.
6
Plug the power cord into a 120V AC power outlet.
7
Press down on and release the motor housing top for short bursts to
produce a pulsing action. Avoid over processing the ingredients.
8
Unplug after use and then remove the motor housing and cover.
9
Carefully remove the blade.
10 Remove the processed food from the chopping bowl.
EMULSIFYING
1
Place food to be whisked (such as egg white) into the chopping
bowl. See chart on p. 15 for maximum quantity.
2
Place the Emulsifying Disc onto the center pin of the chopping bowl
3
Place the cover on the chopping bowl.
4
Insert the motor housing onto the cover.
5
Plug the power cord into a 120V AC power outlet.
6
Press down on the motor housing top until desired results are
obtained.
1/13/11
3:37 PM
Page 11
11
Care and Cleaning
•
Ensure that the unit is unplugged from the electrical outlet
before cleaning.
•
Wipe the motor housing with a damp cloth. Dry thoroughly. Do not
use any abrasive cleaners or scouring pads on the housing as this
will damage the finish.
•
Wash the bowls, cover and all attachments (except motor housing)
in warm water using a mild detergent (or see dishwasher instructions
below). IMPORTANT: Use caution when handling blades as they are
extremely sharp. Dry each part thoroughly before use.
Dishwasher Use
All plastic components deteriorate through the prolonged use of
a dishwasher for cleaning. However all parts of your processor are
tolerant to dishwasher use, (excluding the motor housing). If using
the dishwasher, place parts only on the top rack.
12