Connectors - Vermona Retroverb Lancet Owner's Manual

Connectors

Find a short description of the connectors on Retroverb Lancet's rear panel:
12 VAC
Connect the supplied AC power supply here.
INPUT
Input jack for the audio signal.
PEDAL/CV
Allows connecting a CV-source or a pedal to control the CUTOFF-
frequency.
CRASH
Allows connecting a gate signal to trigger the CRASH function.
TRIGGER IN
Allows connecting audio or gate signals to trigger the envelope-
generator.
BYPASS
Allows connecting a single or double BYPASS footswitch pedal.
OUTPUT
Carries the output signal of Retroverb Lancet to be connected to a mix-
ing console, an audio-interface or an amplifier.
Owner's Manual VERMONA Retroverb Lancet
- 20 -