Amplifier (Vca) - Vermona Retroverb Lancet Owner's Manual

Amplifier (VCA)
A voltage-controlled-amplifier (VCA) controls Retroverb Lancet's output. It
offers the following control elements:
LFO INT
This control sets the LFO's modulation intensity towards the output
volume. The result is a tremolo-effect.
MOD SRC
This switch sets the modulation source for the VCA. There are three
positions:
CV external signal connected to the pedal/CV-input
EF Envelope Follower, a control signal deriving from the level at the
input
EG Envelope Generator - see "Envelope Generator (EG)", page 17
MOD
This switch enables or disables the modulation via the selected modula-
tion source. If it is set to OFF the VCA is opened permanently.
Owner's Manual VERMONA Retroverb Lancet
Picture 8: VCA Section
- 15 -