Envelope Follower (Ef); Pedal/Cv-Input - Vermona Retroverb Lancet Owner's Manual

Envelope Follower (EF)

The envelope-follower converts the amplitude characteristic of the audio
input signal into a control voltage. Most audio signals do not show clear
levels and -jumps as pure control voltages. This results in the envelope-
follower being less effective compared to a regular envelope. In most cases,
it is therefore necessary to increase the VCF modulation intensity to achieve
a comparable effect depth.

Pedal/CV-Input

This input allows connecting a suited pedal or an analogue control voltage
to control the CUTOFF frequency. MOD SRC has to be switched to CV when
using this input.
PEDAL
The PEDAL input allows connecting expression pedals with a TS-
connector. In addition, volume pedals with in- and output can be
connected using Y-cables. Use an expression pedal with a resistance of
100 kΩ to ensure smooth control scaling.
ring
tip
CV
Analogue control voltages ranging from 0-5 volts can be connected to
the PEDAL/CV input. This allows Retroverb Lancet to be controlled from
external CV-sources such as step-sequencers, key-CV of analogue syn-
thesizers, LFOs with special functions as well as Theremin antennas.
Owner's Manual VERMONA Retroverb Lancet
Picture 10: Connecting a Volume Pedal
- 18 -
volume pedal input
volume pedal output