Lenovo Solution Center - Lenovo ThinkStation S30 User Manual

• If the USB device is a printer, make sure paper is loaded correctly.
• Make sure any device drivers or other software supplied with the USB device is correctly installed.
Refer to the documentation for the USB device.
• Reset the device by detaching and reattaching the USB connector.
If these actions do not correct the problem, run the diagnostic programs to test the USB connector (see
"Lenovo Solution Center" on page 112 for instructions). If the USB device came with its own diagnostics,
run those diagnostics against the USB device. If you need technical assistance, see Chapter 12 "Getting
information, help, and service" on page 113.

Lenovo Solution Center

The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It
combines diagnostic tests, system information collection, security status, and support information, along
with hints and tips for maximum system performance.
Notes:
• The Lenovo Solution Center program can be downloaded from http://www.lenovo.com/diags.
• If you are using a Windows operating system other than Windows 7, Windows 8, or Windows 8.1, go to
http://www.lenovo.com/diags for the latest information on diagnostics for your computer.
To run the Lenovo Solution Center program, see "Lenovo programs" on page 5.
For additional information, refer to the Lenovo Solution Center help system.
Note: If you are unable to isolate and repair the problem yourself after running the program, save and print
the log files. You will need the log files when you speak to a Lenovo technical support representative.
112
ThinkStation S30 User Guide