Maximizing The Battery Life; Managing The Battery Power; Power-Saving Modes - Lenovo ThinkPad Yoga 14 User Manual

Note: To maximize the life of the battery, the computer does not start recharging the battery if the remaining
power is greater than 95%.

Maximizing the battery life

To maximize the life of the battery, do the following:
• Use the battery until the charge is completely depleted.
• Recharge the battery completely before using it. You can see whether the battery is fully charged from the
battery-status icon in the Windows notification area.
• Always use power-saving modes, such as sleep mode, and hibernation mode.

Managing the battery power

To achieve the best balance between performance and power saving, adjust your power plan settings.
To access power plan settings, do the following:
• For Windows 7: Start the Power Manager program and then click the Power Plantab. For instructions on
how to start the Power Manager program, see "Accessing Lenovo programs on the Windows 7 operating
system" on page 12.
• For Windows 8.1: Go to the desktop. Right-click the battery-status icon in the windows notification area
and click Power Options. Then click Change plan settings that is next to your power plan.
For more information, refer to the help information system.

Power-saving modes

There are several modes that you can use at any time to conserve power. This section introduces each
mode and gives tips on the effective use of the battery power.
• Screen blank mode (for Windows 7 only)
The computer display requires considerable battery power. To turn off the power to the display and make
the computer enter screen blank mode, right-click the battery gauge icon in the windows notification area
and select Power off display.
• Sleep mode
In sleep mode, your work is saved to memory. The storage drive, and the computer display are turned off.
When your computer resumes to normal operation, your work is restored within seconds.
Depending on the model, your computer might support the 30 Day Standby function. When this function
is enabled, the computer consumes even less power in sleep mode and takes only seconds to resume
normal operation when you press the power button. For more information about the 30 Day Standby
function, do the following:
– For Windows 7: Refer to the help information system of the Power Manager program. For instructions
on how to start the Power Manager program, see "Accessing Lenovo programs on the Windows 7
operating system" on page 12.
– For Windows 8.1: Open the Lenovo Settings program and click Power ➙ 30 Day Standby.
To put your computer into sleep mode, do the following:
– For Windows 7: Use the Start menu shutdown option.
– For Windows 8.1: Move your pointer to the top-right or bottom-right corner of the screen to bring up
the charms. Then click Settings ➙ Power ➙ Sleep.
• Hibernation mode
By using this mode, you can turn off your computer completely without saving files or exiting any
46
User Guide