Power-Saving Modes; Maximizing The Battery Life; Connecting To A Wireless Lan - Lenovo ThinkPad Yoga 11e Chromebook 3rd Gen User Manual

Note: To maximize the life of the battery, the computer does not start recharging the battery if the remaining
power is greater than 95%.

Power-saving modes

There are several power-saving modes that you can use at any time to save power. This section introduces
each mode and gives tips on the effective use of the battery power.
• Sleep
In sleep mode, your work is saved to the memory, and the computer display is turned off. When your
computer wakes up, your work is restored within seconds. To put your computer into sleep mode, close
the computer cover if you are logged in. To resume from sleep mode, open the lid.
Note: If you are not logged in, closing the computer cover will shut down the computer.
• Wireless off
Disable the wireless features, such as Bluetooth or wireless LAN, if you are not using them.
– To disable the wireless LAN, click the status area in the lower-right corner of the screen, and then go to
Settings ➙ Internet connection ➙ Wi-Fi network. In the drop-down list box, select Disable Wi-Fi.
– To disable the bluetooth feature, click the status area in the lower-right corner of the screen, go to
Settings ➙ Bluetooth, and then clear Enable Bluetooth.

Maximizing the battery life

To maximize the life of the battery, do the following:
• Use the battery until the charge is completely depleted.
• Recharge the battery completely before using it. You can see whether the battery is fully charged from the
battery-status icon in the lower-right corner of the screen.
• Take consideration of using power-saving modes, such as sleep mode.

Connecting to a wireless LAN

Wireless connection is the transfer of data without the use of cables but by means of radio waves only. A
wireless local area network (LAN) covers a relatively small geographic area, such as an office building or a
house. Devices based on the 802.11 standards can be connected to this type of network.
Your computer comes with a built-in wireless network card and a configuration utility to help you establish
wireless connections and monitor the connection status. This enables you to stay connected to your
network while you are at work or at home, without a wired connection.
Establishing wireless LAN connections
To establish a wireless connection, do the following:
1. Click the status icon in the lower-right corner of the screen.
2. Go to Settings ➙ Internet connection ➙ Wi-Fi network.
3. Click the Wi-Fi network drop-down list box, a list of available wireless networks is displayed.
4. Double-click a network to connect to it. Provide required information if needed.
Wireless LAN connection status
You can view your computer wireless network connection status and wireless signal strength through the
wireless network connection status icon. The wireless network connection icon is located in the lower-right
corner of the screen.
22
ThinkPad 11e Chromebook 3rd Gen and ThinkPad Yoga 11e Chromebook 3rd Gen User Guide