Paper Load Limit - Canon Pixma iP110 series Online Manual

Paper Load Limit

Commercially Available Papers
Media Name
Plain Paper (including recycled
paper)*2
Envelopes
Canon Genuine Papers
Note
• We recommend that you remove the previously printed sheet from the paper output slot cover before
continuously printing to avoid blurs and discoloration.
Paper for printing photos:
Media Name <Model No.>
Glossy Photo Paper "Everyday Use"
Photo Paper Glossy <GP-601>*3
Photo Paper Plus Glossy II
Matte Photo Paper <MP-101>
Paper for creating your own prints:
Media Name <Model No.>
Photo Stickers <PS-101>
*1 If the corners or edges of the paper are smudged, try to print with the paper thickness lever set to the
left. It may improve print quality. Reset the paper thickness lever when you finish printing.
Front View
*2 Proper feeding of paper may not be possible at the maximum capacity depending on the type of paper
or environmental conditions (either very high or low temperature or humidity). In such cases, reduce the
number of paper you load at a time to less than half.
*3 When loading paper in stacks, the print side may become marked as it is fed or paper may not feed
properly. In this case, load one sheet at a time.
Rear Tray
Approx. 50 sheets
10 envelopes
<GP-501/GP-601>*3
<PP-201>*3
Paper Thickness
Lever*1
Right
Left
Rear Tray
10 sheets
10 sheets
10 sheets
10 sheets
Rear Tray
1 sheet
113
Limit of the
Outputted Paper
Approx. 10 sheets
5 envelopes
Paper Thickness
Lever*1
Right
Right
Right
Right
Paper Thickness
Lever*1
Right