Table of Contents
Advertisement
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
4. Turn on the parking lights and
check that the new bulb is
working.
5. Put the lens back on the bulb
holder and push it until it latches.
6. Slide the left side of the light
assembly into the hole. Push on
the right side to latch the
assembly into place.
Replacing Bulbs in the Interior
Lights
The ceiling light, door light and
vanity mirror light come apart the
same way. They do not all use the
same bulb.
1. Remove the lens by carefully
prying on the edge of the lens with
a fingernail file or a small flat-tip
screwdriver. Do not pry on the
edge of the housing around the
lens.
Door light:
Not available on DX model
Pry on the top middle of the lens.
Ceiling light:
Pry on the front edge of the lens
near both sides.
Spotlight:
Not available on DX model
pry on the front edge in front of
both spotlights.
CEILING LIGHT
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.
Maintenance
Lights
CONTINUED
Advertisement
Chapters
Table of Contents
