Table of Contents
Advertisement
Cooling System
RESERVE TANK
RESERVE TANK CAP
6-cylinder models
5. When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
6. 4-cylinder models
Put a new washer on the drain bolt,
then reinstall the drain bolt in the
engine block. Tighten it securely.
Tightening torque:
61 lbf.ft (83 N.m,8.5 kgf.m)
Maintenance
FILLER NECK
4-cylinder models
HOLDER
6-cylinder models
Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
7 lbf.ft (10 N . m,1.0 kgf.m)
7. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
FILLER NECK
Fill up to here
6-cylinder models
With 5-speed manual transmission:
1.45 US gal (5.5 ,1.21 Imp gal)
With automatic transmission:
1.43 US gal (5.4 ,1.19 Imp gal)
6-cylinder models
1.48 US gal (5.6 ,1.23 Imp gal)
Fill up to here
Advertisement
Chapters
Table of Contents
