Yamaha KX-800/U Owner's Manual page 19

• MEMORY STOP
When the MEMORY button is pressed at the desired point, the tape
automatically stops at that point during fast-forward or rewind operation.
*
This is possible even when the counter. reading is minus.
* To release memory, press the MEMORY button again.
*
When the AUTO MODE selector is set to O-M REPEAT or FULL
REPEAT position, this function can not be activated.
• 0 STOP
When the AUTO MODE selector is set to O-M REPEAT position and the
memory function is not used, the tape stops at a counter reading of 0.00
during fast- forward or rewind operation.
• SINGLE SELECTION
This function is convenient for searching selection when listening to
playback.
When the'" / ~ button is pressed simultaneously with the MUTE/
SEARCH button, or when the SEARCH ••• key on the remote control
transmitter is pressed, the tape will move to the beginning of the current
selection from which point play will be resumed.
When the ~ /~ button is pressed simultaneously with the MUTE/
SEARCH button or when the SEARCH ~ key on the remote control
transmitter is pressed, the tape will move to the beginning of the next
selection from which point play will be resumed.
• DIRECT MUSIC SEARCH (Using the remote control transmitter)
Direct music search is possible up to the selection located 99 selections
after and 98 selections before that which you are now listening to.
Example: For listening to the selection located 10 selections after.
1. Press "1" key and "0" key on the remote control transmitter. Display
indicates
"--10".
2. Press the SEARCH key (~) on the remote control transmitter. The
tape will be fast forwarded to the beginning of the selected selection,
display will show the counter and playback will start automatically.
• Be sure to press the SEARCH key within 3 seconds. Otherwise, the
direct music search is not possible.
Example: For listening to the selection located 10 selection before.
1. Press "1 " key twice on the remote control transmitter.
Display indicates "--11 ". When the selection number is set to "10", the
beginning of the selection located 9 selections before is searched. In
this way, selection is possible up to the selection located 98 selections
before.
2. Press the SEARCH key (••• ) on the remote control transmitter. The
tape will be fast rewound to the beginning of the selected selection,
display will show the counter and playback will start automatically;
• When the specified selection does not exist on the tape, the tape will
be fast forwarded or fast rewound to the end and the direct music
search will be cleared.
• When the fast rewind, fast forward, PLAY or STOP button is pressed
while searching, the direct music search will be cleared.
18