Knoll WE1-DAC Installation And Operating Instructions

Knoll WE1-DAC Installation And Operating Instructions

Knoll we1-dac music receiver

Advertisement

Quick Links

Warranty

Knoll Systems warrants the WE1-DAC sold in the USA and Canada by
authorized Knoll dealers to be free of defects in materials and workmanship.
This warranty extends for one year from the date of purchase by the original
consumer. Any products returned to Knoll Systems and found to be defective
by Knoll Systems within the warranty period will be repaired or replaced at
Knoll Systems option, at no charge. Knoll Systems will not be responsible for
the actual cost of installation or removal of the product, nor for any incidental
or consequential damages. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation may not apply
to you. This warranty gives you specific legal rights. In the USA, you may have
additional legal rights that vary from state-to-state.
Do not use this apparatus near water (for example a bathtub, wash
bowl, kitchen sink, laundry tub, wet basement, swimming pool, or
other areas located near water).
Clean only with dry cloth. Unplug this product from the wall outlet
before cleaning.
Do not install near any heat sources such as stoves or other apparatus
(including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched, particularly
at the plugs, convenience receptacles, and the point where they exit
the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus when unused for long periods.
The manufacturer does not assume any responsibility for personal
injury or property damage incurred due to its interaction with the
WE1-DAC Music Receiver and sources (iPhone iPod etc.).
Knoll Systems
P.O. Box 840, Point Roberts, WA 98281, USA
14-7163 Vantage Way, Delta BC V4G 1N1, Canada
Tel: (604) 940-1689, Fax (855) 734-3363
www.knollsystems.com
Made in China
WE1-DAC
Wi-Fi Music Receiver
Installation and Operating Instructions v1.1
Check at
www.knollsystems.com/we1-dac.html
for any updates as this product is evolving.

Description

The Knoll WE1-DAC is wireless Wi-Fi music receiver
and uses WESHARE protocol to wirelessly connect to
any Wi-Fi enabled source device (such as an iPod,
iPad, most cell phones, notebooks, etc.). It allows
the audio (music) stored on the device as well as
streaming audio from the internet to be played back wirelessly through
your home amplifier and speakers. Connection distances can be up to
100-250 feet (30 -75 m), depending on source device signal strength
and the characteristics of the space it is operating in. Although the
WE1-DAC can indirectly connect to the internet, so it does not need
internet presence to work. With another wireless router connected to
the internet it can stream music from the internet.
Phones tablets and laptops
can be up to 250' (75 m)
away from receiver.
Full 20-20 kHz response
with proprietary top
quality digital to analog
converter (DAC)
Tiny, fits almost anywhere
near your stereo.
Simple operation
Power adaptor works with
100 VAC to 240 VAC 50-
60 Hz
24 bit DAC operates at 192 kbs giving an incredibly quiet 106
dB signal to noise ratios (SNR).
Can be directly inserted in a legacy iPod docking station.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WE1-DAC and is the answer not in the manual?

Questions and answers

Summary of Contents for Knoll WE1-DAC

  • Page 1 Warranty WE1-DAC Knoll Systems warrants the WE1-DAC sold in the USA and Canada by authorized Knoll dealers to be free of defects in materials and workmanship. This warranty extends for one year from the date of purchase by the original Wi-Fi Music Receiver consumer.
  • Page 2 Connecting Apple devices (including iTunes on Windows) If you are connecting to a legacy Apple docking station, the WE1-DAC to the WE1-DAC: has the 30 pin Apple socket for direct connection to the docking station which is connected to the amplifier and speakers. Docking stations Apple Airplay Devices: With the WE1-DAC powered up (indicator is also provide power for the WE1-DAC.
  • Page 3 192.168.8.1 and click “GO” or If you do not have the App client and wish to upgrade the firmware: enter. 1. With WE1-DAC powered on, use a paper clip to reset the WE1- DAC (shown above) until the indicator light stays on.
  • Page 4 WE1-DAC receiver. a network  If you are still unable to get sound from your WE1-DAC, it may  Slow Blinking: Connected to a Wi-Fi network be necessary to un-pair (using a paper clip to press reset for ...

Table of Contents