Advertisement
Save to EEPROM
Chapter 6 The flow of software update and noticeable proceeding
7.1 、The connection of the equipment is shown bellow:
PC
usb port
7.2、software update flow
Use the application software ISP_Tool_V4.3.3.exe (the following digit
means the version of this software)
Open this application software, as is shown bellow:
7.2.1 First, test the connection
Press the button "Connect", the computer will display " Device "on the screen when it is
well connected ,if not, please check the connection again.
7.2.2
Press button "Read" when the connection is OK to load the software
7.2.3
Press button "Auto" to write the software into the flash
Usb cable
Updata Tool
VGA cable
VGA PORT of
LCD TV
40
Advertisement
