Requires very few external components
●
Flexibility in use: mono Bridge-Tied Load (BTL) and stereo Single-Ended (SE); it
●
should be noted that in stereo applications the outputs of both amplifiers are in
opposite phase
High output power
●
Low offset voltage at output (important for BTL)
●
Fixed gain
●
Good ripple rejection
●
Mode select switch (operating, mute and standby)
●
AC and DC short-circuit safe to ground and VP
●
Electrostatic discharge protection
●
Thermal protection
●
Reverse polarity safe
●
Capable of handling high energy on outputs (VP = 0 V)
●
No switch-on/switch-off plop
●
Low thermal resistance.
●
TDA1517 BLOCK DIAGRAM
:
23