Arranging The Interior Fittings; Moving The Shelves; Fully Extendable Drawer; The Masterfresh Drawers - Miele K 1801 Vi Operating And Installation Instructions

Arranging the interior fittings

Moving the shelves

The shelves can be adjusted according
to the height of the food.
^ Hold the shelf on both sides and
raise it slightly so that it can be lifted
over the catches at the back.
^ Pull the shelf forwards.
^ Place the shelf at the required level,
ensuring that it has engaged in the
catches at the back.
^ Make sure that the shelf is on
straight.

Fully extendable drawer

The drawer above the MasterFresh
zone sits on telescopic runners, and
can be fully pulled out for loading and
unloading.
For cleaning, this drawer can be
removed completely.
^ Pull out the drawer.
^ Raise the snap fittings on both sides
and lift the drawer out.
To avoid damaging the telescopic
runners, make sure that they are
pushed back into the appliance.
32
To replace the drawer
^ Pull the telescopic rails out as far as
they will go.
^ Place the drawer back on the rails so
that it engages at the back and front.
^ Push the drawer all the way back into
the appliance.

The MasterFresh drawers

The MasterFresh drawers sit on
telescopic runners, and can be fully
pulled out for loading and unloading.
For cleaning, the MasterFresh drawers
can be removed completely.
^ Pull the MasterFresh drawer out as
far it will go.
To prevent children from hurting
themselves, there is a pin on the door
opening side which needs to be turned
to a horizontal position in order to
remove the drawer.