Probe Wrap Use - iDevices iGrill 2 User Manual

572° (300ºC). Pro Meat Probes may be exposed to temperatures as
high as 620ºF (326ºC).
• The Pro Ambient Probe should be clipped between two grates
inside your grill, smoker or oven. Ensure the tip of the probe does
not touch the grates.
• The probe wraps allow for convenient storage of your probes and
are magnetic so that they can be stored under your iGrill
in use.
The colored probe indicators are for visual identification of
the probe(s) within the app and cosmetic purposes only.
They are not designed for heat safety.
The probes should be cleaned by hand with a dishcloth,
standard dishwashing soap and warm water. The probes are
not dishwasher safe. Take precaution not to get the probe's
wiring wet.
Be sure to avoid water exposure to the probes' wiring as
well as the area where the probes' wiring meets the probes.
The probes are not waterproof and damage may result from
water exposure. The probes should never be submersed in
water.
Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the iDevices Connected app and
will cause the probe to disappear from connection.

Probe Wrap Use

To wrap your probe(s):
• Hold the probe wrap so that the clip segment is on the bottom left
and the iDevices logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap's clip, ensuring that the probe's
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointed downward.
8
when not
2