Probe Wrap Use; Using The Kitchen Thermometer; Display - iDevices Kitchen thermometer User Manual

Probe Wrap Use

To wrap your probe(s):
• Hold the probe wrap so that the clip segment is on the bottom left
and the iDevices logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap's clip, ensuring that the probe's
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointing downward.
• Wrap your probe's wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap's wire channel to secure the wrapping.
Using the Kitchen
Thermometer

Display

The Kitchen Thermometer's display contains the following:
Display
• Displays temperature of currently active probe.
• Displays "DC" for temperatures below -22°F (-30ºC).
• Displays "DH" for temperatures above 572°F (300ºC).
• Displays "OFF" during power off sequence.
• Animates during power on sequence and during reset.
Bluetooth LED
• Blinks blue when discoverable and awaiting pairing.
• Illuminates solid blue when paired.
Probe Indicator LED's
9