Probe Wrap Use; Using The Igrill; Smart Led - iDevices igrill mini User Manual

Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the iDevices Connected app and
will cause the probe to disappear from connection.

Probe Wrap Use

To wrap your probe:
• Hold the probe wrap so that the clip segment is on the bottom left
and the iDevices logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap's clip, ensuring that the probe's
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointed downward.
• Wrap your probe's wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap's wire channel to secure the wrapping.

Using the iGrill

Smart LED

The Smart LED allows the iGrill
temperature reading through the use of color. Below is a list of all of the
light combinations you will see on the Smart LED and their associated
meanings:
Connection
• Solid White: Powering off or reset complete.
• Solid Blue: Confirms pairing of new device.
• Blinking Blue: Awaiting pairing or no alarm set.
9
mini
to display the connected probe
mini