Probe Use - iDevices iGrill 2 User Manual

• The iGrill
into its base for two different viewing angles.
• The iGrill
on one side. This allows the iGrill
magnetic surface. The magnetic disc has a protective cover on its
face to protect it from being scratched.
To mount your magnetic disc, please follow the below steps:
• Clean the surface thoroughly where the magnetic disc will be
adhered to ensure proper bonding.
• Remove the film covering the adhesive on the magnetic disc.
• Adhere the magnetic disc to your desired surface.
• Let the magnetic disc bond to the surface for 6-12 hours before
mounting your iGrill
• Place your iGrill
The magnetic base is not designed to withstand high heat
and it must be placed on a cool surface. If the surface is too
hot to touch, it's too hot for the iGrill

Probe Use

• Pro Meat Probe and Pro Ambient Probe Acceptable Temperature
Range: -22°F to 620°F (-30ºC to 326ºC)
• Meat Probe Acceptable Temperature Range: -22ºF to 572ºF (-30ºC
to 300ºC).
• The Meat Probes should always be inserted into the center of the
item being cooked for an accurate temperature reading.
• When using a standard Meat Probe, be sure to route the probe wire
where it will not be exposed to flames or temperatures exceeding
7
can be taken out of its base, rotated 180° and set back
2
comes with an optional magnetic disc with an adhesive
2
to the disc.
2
on the magnetic disc.
2
to magnetically mount to a non-
2
base!
2