Operation - Betec IceCrusher Instruction Manual

IceCrusher Anleitung
PARTS

OPERATION

1. Place the Ice Crusher (clear bowl) packed with the unit under the bottom opening of the ice
crusher. Plug the unit in and set the ON/OFF power switch to the ON position.
NOTE:
Ice crusher will not operate unless Ice Container is secured into position.
2. To begin crushing ice, drop cubes into feeder chute opening on top of unit. Blades of crusher unit
are self feeding. DO NOT ATTEMPT TO PUSH CUBES INTO BLADES WITH HAND OR
INSTRUMENT.
3. If a large cube should become lodged in the crushing unit so that blades cannot reach it, set power
switch to the OFF position and unplug unit from outlet.
Then pour warm water down through feeder chute until lodged cube is melted or falls free. Plug
unit back into outlet, set the power switch to the ON position, and resume feeding cubes through
the feeder chute.
HOW TO CARE FOR YOUR ICE CRUSHER
1. UNPLUG POWER CORD FORM OUTLET.
2. Pour hot water through top feeder chute to rinse out after each use.
3. Wipe outside of ice crusher with a clean damp cloth.
4. NEVER IMMERSE UNIT IN WATER.
23.02.2009 9:58 Uhr
1. Ice Chute
2. Housing
3. Switch
Seite 6