GMC 2012 Terrain Owner's Manual page 204

7-44 Infotainment System
3. Say each digit, one at a time,
that you want to store. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say Store, and then follow the
directions given by the system to
save a name tag for this number.
Using the Delete Command
1. Press
/ . The system
responds Ready, followed
by a tone.
2. Say Delete.
3. Say the name tag you want to
delete.
Using the Delete All Name Tags
Command
This command deletes all stored
name tags in the Hands Free
Calling Directory and the
Destinations Directory.
To delete all name tags:
1. Press / . The system
responds Ready, followed
by a tone.
2. Say Delete all name tags.
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the List Command
1. Press / . The system
responds Ready, followed
by a tone.
2. Say Directory.
3. Say Hands Free Calling.
4. Say List.
Making a Call
Calls can be made using the
following commands.
Dial or Call: The dial or
call command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial: This command allows
a phone number to be dialed by
entering the digits one at a time.
Re dial: This command is used to
dial the last number used on the cell
phone.
Using the Dial or Call
Command
1. Press / . The system
responds Ready, followed
by a tone.
2. Say Dial or Call.
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.