Pair Devices - Nokia E71 User Manual

Tip: You can access the files in the device or on the
memory card using a compatible accessory that
supports the File Transfer Profile Client service (for
example, a laptop computer).
A Bluetooth connection is disconnected automatically after
sending or receiving data. Only Nokia PC Suite and some
enhancements such as headsets may maintain a connection
even if not actively used.

Pair devices

Open the paired devices tab.
Before pairing, decide on your own passcode (1-16 digits)
and agree with the user of the other device to use the same
code. Devices that do not have a user interface have a fixed
passcode. You need the passcode only when you connect the
devices for the first time. After pairing, it is possible to
authorize the connection. Pairing and authorizing the
connection makes connecting quicker and easier, as you do
not have to accept the connection between paired devices
every time you establish a connection.
The passcode for remote SIM access must have 16 digits.
1. Select Options New paired
>
to search for Bluetooth devices within range. If you have
sent data using Bluetooth before, a list of the previous
search results is displayed. To search for more Bluetooth
devices, select More
© 2008-2009 Nokia. All rights reserved.
device. The device starts
devices.
2. Select the device with which you want to pair and enter
the passcode. The same passcode must be entered to the
other device as well.
3. Select Yes to make the connection between your device
and the other device automatic, or
connection manually every time a connection attempt is
made. After pairing, the device is saved to the paired
devices page.
To give a nickname to the paired device, select
Assign short name. The nickname is only displayed in your
device.
To delete a pairing, select the device whose pairing you want
to delete and Options > Delete. To delete all pairings, select
Options Delete all. If you are currently connected to a
>
device and cancel the pairing with that device, pairing is
removed immediately and the connection is ended.
To allow a paired device to connect automatically to your
device, select Set as authorized. Connections between your
device and the other device can be made without your
knowledge. No separate acceptance or authorization is
needed. Use this status for your own devices, such as your
compatible headset or computer, or devices that belong to
someone you trust. If you want to accept connection requests
from the other device separately every time, select
unauthorized.
To use a Bluetooth audio enhancement such as a Bluetooth
handsfree or headset, you need to pair your device with the
enhancement. See the enhancement user guide for the
passcode and further instructions. To connect to the audio
Connectivity
No to confirm the
Options
>
Set as
109