Optical Digital Audio Connector; Microphone Jack; External Monitor Port - Fujitsu LifeBook P7000 User Manual

L i f e B o o k P 7 0 0 0 N o t e b o o k – S e c t i o n F o u r

OPTICAL DIGITAL AUDIO CONNECTOR

The optical digital audio-out connector allows you to
download digital audio to MiniDisc recorders. It uses
SPDIF (Sony Philips Digital Interface) format. Use the
following setting when using the digital audio-out
connector.
When headphones or a SPDIF cable is
■
installed, the speakers are disabled.
■ Before using the SPDIF function, make
sure that WinDVD software is installed
on your system.
Certain older CDs and DVDs will not
■
work in conjunction with the SPDIF con-
nector.
1. Connect the MiniDisc recorder or external speaker
to the Optical Digital Audio-Out Connector.
(Figure 4-24)
2. Insert the disk you want to play in the DVD/CD-RW
tray.
3. Click on Start -> Programs -> InterVideo
WinDVD. (In Windows XP systems, you can go
directly from Start to InterVideo WinDVD.)
4. When the WinDVD interface appears, right-click in
the WinDVD window and select [Setup] from the
menu.
5. Click on the Audio tab and select Enable S/PDIF
output.
6. Click [Apply].
■ The frequency of the digital sound
output from the SPDIF output connector
is fixed to 48KHz. If a sampling rate
convertor is not installed in your
connecting digital electronic device
(e.g., MD player), recording is not
possible. Please see the user manuals for
the electronic devices for further details.
The sound recorded through connecting
■
a digital electronic device (e.g., MD
player) to the SPDIF output connector
cannot be used as digital output. All
output data from the SPDIF output
connector has copyright protection
information included.
■ Please be careful, as there are several
types of cables for connecting a digital
electronic device (e.g., MD player) to
the digital audio-out connector, depend-
ing on the connector type. The connec-
tor on your computer is an Optical Mini
Plug (3.5mm diameter mini plug)
46

MICROPHONE JACK

The microphone jack allows you to connect an external
mono microphone. Your microphone must be equipped
with a 1/8"(3.5 mm) mono mini-plug in order to fit into
the microphone jack of your notebook. In order to
connect a microphone follow these easy steps:
Microphone Jack
Figure 4-25 Microphone jack
1. Align the connector with the port opening (Figure 4-
25).
2. Push the connector into the port until it is seated.

EXTERNAL MONITOR PORT

The external monitor port allows you to connect an
external monitor. In order to connect a monitor follow
these easy steps:
1. Open the protective cover on the right side of the
system (Figure 4-26).
2. Align the connector with the port opening.
3. Push the connector into the port until it is seated.
Figure 4-26 Installing the External Monitor Cable
Pressing the [Fn] + [F10] keys allows you
to change your selection of where to send
your display video. Each time you press the
key combination, you will step to the next
choice, starting with the built-in display
panel only, moving to the external monitor
only, finally moving to both the built-in
display panel and an external monitor.