Samsung Galaxy Note 3 User Manual page 132

Enable Wi-Fi Direct
Important! The target device must already be connected to
the same Wi-Fi and have its Wi-Fi Direct feature
active and scanning before you can your pairing.
1. From the Apps screen, tap
2. From the Settings page, under Wireless and
networks, tap Wi-Fi.
3. Touch and slide the Wi-Fi slider
it On.
4. Tap Wi-Fi Direct.
5. Tap Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap Multi-connect
names to begin the connection process to these Wi-Fi
Direct compatible devices.
126
Settings.
ON ON
to the right to turn
OFF OFF
Scan and select all the device
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
6. Tap Done. The direct connection is then established.
Confirm appears in the Status bar.
7. When prompted to complete the connection, the
recipient should tap OK. Your status field now reads
"Connected" and your connected device is listed within
the Wi-Fi Direct devices listing.
8. Each partner (including yourself) must then tap Accept
to consent to the new Wi-Fi Direct pairing.
To enable Share shot on Camera:
1. From the Apps screen, tap
Settings Share
2. If you are prompted to activate your Wi-Fi Direct
connection, tap OK and follow the activation
procedures for Wi-Fi Direct.
Camera Quick
Share shot.