Samsung Galaxy Note 3 User Manual page 105

3. Aim your device at the TV and tap
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
4. If the TV turned on, tap Yes, this code works.
– or –
If the TV did not turn on after tapping
waiting 10 seconds, tap No, test next code or
Send this code again.
5. From the Select your channel source screen, select
the entry that corresponds to your current channel
control method:
• Set-top Box: selected when channel changes are
accomplished using a receiver box. Channels are not
changed with the TV remote but rather through the
receiver/box.
Power to
Note: Try matching your current channel selection method.
6. Select the Satellite Box Brand from the available list.
Power and
Important! You must configure your set top box for IR
7. When prompted to Enable IR, tap More Info to learn
8. Only after completing the IR setup process and
• My xxx TV: selected when a signal is fed directly into
the TV and no box is used. Channels are changed
directly on the TV by using the TV remote and not a
box's remote.
®
For example, DirectTV .
• If your brand does not display in the list, tap Show
other brands and follow the onscreen instructions.
communication with your device. If you do not
select More Info below and follow the
onscreen instructions you may not be able to
properly use the application.
how to configure your set top box to receive and
respond to IR controls.
programming your box, press (Back).
Applications 99