Table of Contents
Advertisement
Step 1
The gimbal mount surface mounted to ceiling.
Default position out of the box is for vertical orientation of the camera view.
For horizontal orientation of camera the housing must be opened by removing the 4,M3 button
head screws located on each side of the housing.
Camera module rotates 90 degrees in the desired direction.
* The gimbal mount surface mounted vertically.
* The gimbal mount surface mounted horizontally.
Camera module
Open the box and unwrap the camera housing. Remove the top and bottom M6 Allen head screws
and seperate the gimbal mount from the housing.
Drill a feet-thru hole for the camera cable on the mounting surface.
Module support
Camera module
Module support
5
Advertisement
Table of Contents
