Table of Contents
Advertisement
4026-0XX
Paper Never Reaches The Exit Sensor
FRU
1
Input Sensor
2
D-Roll
Assembly
3
Paper Feed
Frame
Assembly
4
Fuser Assem-
bly
Paper Jam In The Fuser Assembly
FRU
1
Fuser Assem-
bly
2
Exit Sensor
Any Jam After The Exit Sensor
FRU
1
Fuser Assem-
bly
2
Exit Sensor
2-36
Action
Check the input sensor for proper operation. If
incorrect, go to the
Check" on page
2-20.
Check the D-Roll assembly for proper operation.
If incorrect go to the
Check" on page
2-16.
Check the paper feed frame assembly. If paper
is not being fed to the fuser assembly, go to the
"Paper Feed Frame Assembly Service Check"
on page
2-37.
Be sure the fuser assembly is free of excessive
toner or other contamination and is operating
correctly. Repair as necessary.
Action
Check the fuser assembly for excessive toner
build-up on the input paper guide, paper separa-
tors, hot roll, backup roll and any signs of dam-
age, overheating, or broken and damaged parts.
Repair as necessary.
Go to the "Exit Sensor Service Check" on
page 2-17.
Action
Manually turn the fuser drive gear and be sure
the fuser drive assembly is working correctly. Be
sure the paper feed exit shaft and gear are also
operating properly. Repair as necessary.
Go to the "Exit Sensor Service Check" on
page 2-17.
"Input Sensor Service
"D-Roll Assembly Service
Advertisement
Table of Contents
