Framework And Dimension - LINOVISION IPC-VEC754PF-E Quick Start Manual

Port Name Cable
Color
Grey
White
Blue
Orange

1.2 Framework and Dimension

Please refer to the following figure for dimension information. The unit is mm. See Figure 1-2 and
Figure 1-3.
Name Note
Alarm input port 2. It is to receive the on-off signal
ALARM_IN2
from the external alarm source.
Alarm output port. It is to output the alarm signal
to the alarm device.
ALARM_NO
NO: normal open alarm output port.
It works with the ALARM_COM port.
It is to restore factory default setup.
When the device is working properly, please
RESET
connect the blue cable (restore default setup port)
to the orange cable (GND signal) for 5 seconds,
the device can resume factory default setup.
GND Ground port
Figure 1-2
2