Sd Card Installation; Lens Adjustment - LINOVISION IPC-VEC754PF-E Quick Start Manual

2.2 SD Card Installation

Important
Before you install the SD card, please unplug he power cable to shut down the device!
First, please refer to the step1 in the chapter 2.1 to open the device.
Second, please adjust the proper position to install the SD card.
Last, please refer to the step 7 in the chapter 2.1 to complete the installation. See Figure 2-7.
With IR light

2.3 Lens Adjustment

Step 1
Slightly loose the screw B manually and then turn the screw B slowly. Adjust the lens focus
distance to the proper position according to the monitor video. See Figure 2-8.
Step 2
Use the flat screwdriver to loose the screw A slightly and then turn the Screw A slowly. Adjust the
lens focus to get the clear video and then use the flat screwdriver to secure the screw firmly.
Step 3
When you are adjusting the screw A, the video may becomes blur. Please slightly adjust the
screw B manually to get the vivid video. Finally fix the screw.
Figure 2-6
Without IR light
Figure 2-7
7