1. Manuals
  2. Brands
  3. LINOVISION Manuals
  4. Security Camera
  5. IPC-VEC754PF-E
  6. Quick start manual

LINOVISION IPC-VEC754PF-E Quick Start Manual

Hd vandal proof ip dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

HD Vandal Proof IP Dome Camera Quick Start Guide
Version 3.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPC-VEC754PF-E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LINOVISION IPC-VEC754PF-E

Summary of Contents for LINOVISION IPC-VEC754PF-E

  • Page 1 HD Vandal Proof IP Dome Camera Quick Start Guide Version 3.0.0...
  • Page 2 Welcome Thank you for purchasing our IP camera! This quick start guide is designed to be a reference tool for your system. Please keep this start guide well for future reference. Please open the accessory bag to check the items one by one in accordance with the list below. Contact your local retailer ASAP if something is missing or damaged in the bag.
  • Page 3 The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera. 6. Daily Maintenance Please shut down the device and then unplug the power cable before you begin daily maintenance work. Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface.

  • Page 4: Table Of Contents

    Table of Contents Framework...........................1 Multiple-function Combination Cable ................1 Framework and Dimension..................2 Installation ...........................4 Device Installation ......................4 SD Card Installation .....................7 Lens Adjustment......................7 Quick Configuration Tool......................9 Overview ........................9 Operation ........................9 Web Operation..........................12 Network Connection....................12 Login and Logout......................12 Appendix Toxic or Hazardous Materials or Elements ...............15...

  • Page 5: Framework

    1 Framework 1.1 Multiple-function Combination Cable You can refer to the following figure for multiple-function combination cable information. See Figure 1-1 Figure 1-1 Please refer to the following sheet for detailed information. Port Name Function Connection Note Video output Output analog video signal. It can connect to the VIDEO OUT port TV monitor to view the video.

  • Page 6: Framework And Dimension

    Port Name Cable Name Note Color Alarm input port 2. It is to receive the on-off signal Grey ALARM_IN2 from the external alarm source. Alarm output port. It is to output the alarm signal to the alarm device. White ALARM_NO NO: normal open alarm output port.
  • Page 7 Figure 1-3...

  • Page 8: Installation

    2 Installation This series IPC can be put on the table to realize surveillance. Or you can use the bracket or the in-ceiling installation to realize the hang function. Please refer to the steps listed below. 2.1 Device Installation Step 1 Use the inner hexagonal wrench (provided) to loose the three inner hexagon screws in the dome cover and then open the cover.
  • Page 9 Step 3 Draw out the cable exit and four screw holes in the installation position according to the device pedestal. Dig the four plastic expansion bolt holes and cable exit. Insert the four plastic expansion bolts into the screw holes Step 4 Adjust the camera pedestal to the proper position and then draw the cable through the cable exit you just dug in the ceiling (wall).
  • Page 10 d):Adjust the turning ring of the pedestal, you can adjust the module pan rotation angle ( °～355° e): Put the enclose back after you completed the setup. With IR light Without IR light Figure 2-4 Please note, the screws in the following figure are the optical adjustment component. Please make sure it is outward and do not allow it to touch the X-Y-Z axis module.

  • Page 11: Sd Card Installation

    Figure 2-6 2.2 SD Card Installation Important Before you install the SD card, please unplug he power cable to shut down the device! First, please refer to the step1 in the chapter 2.1 to open the device. Second, please adjust the proper position to install the SD card. Last, please refer to the step 7 in the chapter 2.1 to complete the installation.
  • Page 12 With IR light Without IR light Figure 2-8...

  • Page 13: Quick Configuration Tool

    3 Quick Configuration Tool 3.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 3.2 Operation Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 3-1.
  • Page 14 Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 3-3. Figure 3-3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set. In the configuration tool search interface (Figure 3-1), please select a device IP address and then double click it to open the login interface.
  • Page 15 Figure 3-5 For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.

  • Page 16: Web Operation

    4 Web Operation This series IPC product support the Web access and management via PC. Web includes several modules includes monitor channel preview, PTZ control, system configuration, alarm and etc. 4.1 Network Connection Please follow the steps listed below for network connection. Make sure the IPC has connected to the network properly.
  • Page 17 Figure 4-2 If it is your first time to login in, system pops up warning information to ask you whether install control webrec.cab or not after you logged in for one minute. Please click OK button, system can automatically install the control. When system is upgrading, it can overwrite the previous Web too. If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the control download.
  • Page 18 Figure 4-4 Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.

  • Page 19: Appendix Toxic Or Hazardous Materials Or Elements

    Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component Device Construction ○ ○ ○ ○ ○ ○ Material Wire and Cable ○ ○...

Table of Contents