Table of Contents
Advertisement
Stainless Steel Gas Fireplace
Installation and Owner's Manual
.
WARNING: If the information in these
.
instructions is not followed exactly, a fire or
explosion may result causing property
damage, personal injury or death.
--Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
--WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance
• Do not touch any electrical switch; do
not use any phone in your building;
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call
the fire department.
-- Installation and service must be performed
by a qualified installer, service agency or
the gas supplier.
Outdoor Ventless
Model MBO-36
Canadian Fire Hearth Mfg
7075-Beatty Drive, Mission B.C. V2V-6C4
©
INSTALLER: Leave this manual with the customer
:
CUSTOMER
Retain this manual for future reference
FOR OUTDOOR INSTALLATION ONLY
PLEASE NOTE: This product has been manufactured
using steel and screws. As a result, there are many
sharp edges that can easily cut exposed skin. It is
highly recommended that you wear proper protective
gloves while installing the unit, and during routine
cleaning or maintenance.
1
Advertisement
Table of Contents
Related Manuals for Luxor MBO-36
Summary of Contents for Luxor MBO-36
- Page 1 © Outdoor Ventless Stainless Steel Gas Fireplace Model MBO-36 Canadian Fire Hearth Mfg 7075-Beatty Drive, Mission B.C. V2V-6C4 Installation and Owner’s Manual INSTALLER: Leave this manual with the customer WARNING: If the information in these CUSTOMER Retain this manual for future reference...
-
Page 2: Table Of Contents
Table of Contents Page 1……………………………………………………….Cover Page with Safety Information Page 2……………………………………………………….Table of Contents Page 3 & 4…………………………………………………..Customer Greeting & Safety Information Page 5 ………………………………………………………Features and Specifications Page 6……………………………………………………….Framing Specifications Page 7……………………………………………………… Finishing/Mantel Allowances Page. 8…………………………………………… …………Installation Page 9……………………………………………………….Installation cont. Page 10………………………………………………………Clearance Specifications Page 11………………………………………………………Lighting Instructions Page 12………………………………………………………Thermostat Page 13………………………………………………………Log Set Installation... - Page 3 CONGRATULATIONS Welcome to Our Luxor Gas Fireplace Family We hope you’ve had an easy and enjoyable time choosing from our line of products, and we certainly appreciate your business. Please take some time to read through the following information, and make sure to heed all of the warnings.
- Page 4 Do not alter gas orifice Do not operate the fireplace if damaged. Any repairs must be done by a certified technician. Certification The Model MBO-36 is listed and certified for installation in the U.S.A. and Canada under the following standards: ANSI Z21.97 2010/CR97-003.
-
Page 5: Features And Specifications
FEATURES AND SPECIFICATIONS Note: Always check appliance label for correct information MODEL: MBO36 Natural Gas Manifold Pressure 3.5in. w.c. Min. Supply pressure 5.5in. w.c. for purpose of input adjustment Max Supply pressure 11in. w.c. Orifice size Nominal input rating 35000 BTU/hr High altitude (US) 0-2000ft / 0-610m High altitude (Canada) - Page 6 Installation Minimum Framing Dimensions 16.75 Framing and Clearance Unit maybe installed in any location that maintains proper clearances to air conditioning ducts, electrical wiring and plumbing. Safety, as well as efficiency of operation must be considered in selecting a fireplace location.
- Page 7 Fireplace Cleanface Top edge of fireplace opening Side wall 1.5” Mantel/Surround Side clearance The MBO-36 is shipped with non-combustible panels which must be installed with the appliance to conform with to certified safety standards. the panel is secured above the Cleanface...
- Page 8 Placements of Non-combustible Panels In any installation in which the unit is installed into a chase constructed of combustible materials ie: plywood, wood framing, convention wall board (including “waterproof” type) a certified non-combustible ½ in thickness or greater board must be installed in the designated areas. PLEASE NOTE: It is mandatory that all supplied non-combustible panels be installed.
- Page 9 Installing Gas and Electrical Supply Lines. Gas and lines must be installed and accessible for the installation of the MBO-36. Natural Gas requires a minimum inlet gas pressure of 5.5 in W.C.. IMPORTANT: Installer please allow a portion of the gas line connecting to the appliance to be flexible enough for moving and aligning the appliance into the chase.
-
Page 10: Clearance Specifications
Clearance Specifications FP = fireplace opening = air supply inlet = area where fireplace is not permitted A = 2in. clearance above grade I = 3ft. (USA) clearance to service regulator veranda, porch, deck or 6ft.(Canada) vent outlet and electrical service. balcony B = 12in. - Page 11 For your safety, read the following before lighting: WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage and personal injury or death. A. This appliance has a pilot which must be lighted by hand. C.
-
Page 12: Thermostat
Thermostat Installation (not allowed in US installations) Note: The wall switch MUST be rated for electronic Minimize splicing in all wiring and solder all unavoidable splices. Thermostat Wire Information 12.2 19.5 30.5 wall switch installation The burner control switch is located in the centre of the control department opening. For your convenience, the unit can also be operated by a thermostat or a wall switch control. -
Page 13: Log Set Installation
MB0-36 Outdoor Gas Log Set Log set up Place the largest log on the log support shelf located on the rear panel above the air inlet. A small tab folded up from the shelf is provided to secure to log in position. - Page 14 Logs #2 and #3 join together at the tops so that the pin inserts into the corresponding hole as shown in the insert.. Support the lower end of the angled logs on the brace mounted on the burner face as shown Place log #4 onto the logs set in the previous step.
- Page 15 The Next and final steps are to place the small log pieces #4 and #5 as shown then the three rocks shown in the illustration below. NOTE: • It is important that while placing the logs and stones they must not directly cover any of the burner ports •...
-
Page 16: Flame Quality
Igniter Electrode Pilot Check: The MBO-36 utilizes a standing pilot which remains on at all times. Pilot assembly is covered almost entirely by the wind shield and maybe difficult to see. The visible part of the flame tips should always be blue in colour. If the flame characteristics are in doubt a qualified technician or gas... -
Page 17: Replacement Parts
Replacement Parts List BURNER COMPONENTS Pilot Assy. (NG) DC006NG MBO36 Valve Tray MBO36 Gas Tray Valve tray Gasket GK01 CFH Electronic Pilot Assembly DC006E Main Burner Orifice (Natural Gas) MBO36NG Replacement Log Set LSMBO36 NON-COMBUSTABILE COMPONENTS Top Panel (placed on top edge of Cleanface Surround) 40”x4” FB006 Back Panel (placed on the back of the appliance) 24”x16”... -
Page 18: Final Checks
Final Checks Installer: Before leaving the appliance with the customer, you must check the operation of the appliance. Cold Weather Operation *Check correct rating by clocking the appliance at 15 minutes. When using any gas appliance (LP or NG Fuels) water is a (See label) byproduct of the combustion process. -
Page 19: Warranty
After the first year, with respect to the Luxor Limited Lifetime Warranty, CFHMfg may, at its discretion, fully discharge all obligations with respect to this warranty by refunding to the original warranted purchaser the wholesale price of any warranted but defective part(s).
Need help?
Do you have a question about the MBO-36 and is the answer not in the manual?
Questions and answers