Related Manuals for Certa CT18VIMPWRA
Summary of Contents for Certa CT18VIMPWRA
- Page 2 General Tool Safety Warnings......................2 Work Area............................2 Electrical Safety..........................2 Personal Safety..........................2 Power Tool Use and Care......................3 Battery Tool Use and Care......................3 Additional Warnings Applicable for the Impact Driver..........4 Important Safety Instructions for Battery Charger............4 Important Safety Instructions for the Battery Pack............5 Symbols..............................6 Product Information.........................6 Layout..............................6...
- Page 3 Save all warnings and instructions for future reference. The term “power tool” refers to your mains operated (corded) power tool or battery-operated (cordless) power tool. 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2.
- Page 4 energizing power tools that have the switch on invites accidents. 4. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 5.
- Page 5 terminals together may cause burns or a fire. 5. Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Page 6 reassembly may result in a risk of electric shock, electrocution or fire. • Battery short or fire may result. • Functional Description and Specifications. Other types of batteries may burst causing personal injury and damage. • This is important to prevent serious damage to the battery cells. •...
- Page 7 The following symbols or initials may be used on the tool. Please see below to learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Volts Voltage Amperes Current Hertz Frequency (cycles per second) Kilograms Weight Minutes...
- Page 8 This tool is intended for driving in and loosening screws as well as for drilling into wood, metal, ceramic and plastic. Even when a tool is used as prescribed, it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool's construction and design: Damage to lungs if an effective dust mask is not worn.
- Page 9 The battery can be damaged. The battery is equipped with an NTC temperature control which allows charging only within a temperature range of between 0°C and 45°C. A long battery service life is achieved in this manner. If the battery pack fails to become charged, please check whether there is voltage at the socket-outlet •...
- Page 10 The speed of the switched on power tool can be variably adjusted, depending on how far the On/Off switch is pressed. Light pressure on the On/Off switch results in a low rotational speed. Further pressure on the switch results in an increase in speed.
- Page 11 Protect the battery against moisture and water. Store the battery only within a temperature range between 0°C and 45°C. As an example, do not leave the battery in the car in summer. Occasionally clean the venting slots of the battery using a soft, clean and dry brush.
Need help?
Do you have a question about the CT18VIMPWRA and is the answer not in the manual?
Questions and answers