Nokia NSB-9 Service Manual page 98

NSB-9 Company confidential
CCS Technical Documentation
Activate the connection you want to use by clicking it and use up/down arrows to move
it on top of the list. Choose "Apply".
The connection is now selected and can be used after closing the "Manage Connections"
window.
Selected connection will be shown on the right hand bottom corner of the screen.
To use the selected connection, connect the phone to Phoenix with correct service tools,
make sure that it is switched on and select "Scan Product".
When the Product is found, Phoenix will load product support and when everything is
ready, name of the loaded product support module and its version will be shown on the
bottom of the screen.
Copyright Nokia. All rights reserved.
Page 22 Issue 1 04/03