Toyota 2006 TACOMA User Manual page 329

carownersmanual.net
carownersmanual.net
06 04.25
—Lowering your vehicle
Two- wheel drive models except
PreRunner
Four- wheel
PreRunner
10.Lower the vehicle completely
Turn the jack handle end with the ex-
tension counterclockwise with handle
to lower the vehicle, making sure the
LS40020 handle remains firmly fitted onto the
jack handle extension.
Use only the wheel nut wrench and
turn it clockwise to tighten the nuts.
Do not use other tools or any addition-
al leverage other than your hands,
such as a hammer, pipe or your foot.
Make sure the wrench is securely en-
gaged over the nut.
Tighten each nut a little at a time in
the order shown. Repeat the process
until all the nuts are tight.
LS40019
drive models and
and tighten the wheel nuts.
2006 TACOMA from Jan.'06 Prod. (OM35871U)
CAUTION
D When lowering the vehicle,
make sure all portions of your
body and all other persons
around will not be injured as
the vehicle is lowered to the
ground.
D Have the wheel nuts tightened
with torque wrench to 113 N·m
(11.5 kgf·m, 85 ft·lbf), as soon
as possible after changing
wheels. Otherwise, the nuts
may loosen and the wheels
may fall off, which could cause
a serious accident.
329