Toyota 2006 TACOMA User Manual page 328

carownersmanual.net
carownersmanual.net
06 04.25
Before putting on wheels, remove any
corrosion on the mounting surfaces
with a wire brush or such. Installation
of wheels without good metal- to- met-
al contact at the mounting surface can
cause wheel nuts to loosen and
eventually cause a wheel to come off
while driving.
328
—Reinstalling wheel nuts
LS40017
9. Reinstall all the wheel nuts fin-
Reinstall the wheel nuts (tapered end
inward) and tighten them as much as
you can by hand. Press back on the
tire back and see if you can tighten
them more.
LS40018a
ger tight.
2006 TACOMA from Jan.'06 Prod. (OM35871U)
CAUTION
Never use oil or grease on the
bolts or nuts. Doing so may lead
to overtightening the nuts and
damaging the bolts. The nuts
may loosen and the wheels may
fall off, which could cause a seri-
ous accident. If there is oil or
grease on any bolt or nut, clean
it.