Toyota 2006 TACOMA User Manual page 326

carownersmanual.net
carownersmanual.net
06 04.25
—Positioning the jack
Front
5. Position the jack at the correct
jack point as shown.
Make sure the jack is positioned on
a level and solid place.
JACK POINTS:
Front—Under the frame side rail
Rear—Under the rear axle housing
326
LS40014
Rear
Put a wheel nut wrench, jack handle
extension and jack handle end togeth-
er as shown in the illustration.
1 Jack handle end
2 Jack handle extension
3 Wheel nut wrench
Make sure they are each securely
fixed with screws.
—Raising your vehicle
LS40005a
6. After making sure that no one
Rear side only—
When positioning the jack under the
CAUTION
rear axle housing, make sure the
groove on the top of the jack fits with
the rear axle housing.
2006 TACOMA from Jan.'06 Prod. (OM35871U)
LS40037
Front of
vehicle
is in the vehicle, as the jack
touches the vehicle and begins
to fit, double- check that it is
properly positioned.