Toyota 2006 TACOMA User Manual page 154

carownersmanual.net
carownersmanual.net
06 04.25
To install a Child Restraint System in the
rear seat properly, make sure the bottom
seat cushion is flipped over. If the bottom
seat cushion is already flipped over, pro-
ceed to step 3.
1. Pull the lock release strap.
2. Flip over the bottom cushion.
128
LS13004a
3. Be sure to follow the Child Restraint
System manufacturer's instructions for
the recommended installation proce-
dure.
4. Push and pull the Child Restraint Sys-
tem in different directions to ensure a
secure installation.
5. If the Child Restraint System shakes or
vibrates when used, install a cushion
between the Child Restraint System
and the flipped- over surface of the
seat.
2006 TACOMA from Jan.'06 Prod. (OM35871U)
CAUTION
To install the child restraint system
properly, make sure the bottom cush-
ion is flipped over whenever you use
a child restraint system in the rear
seating area.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" on page 117 in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
CAUTION
D
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
D
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.