Installation; Unpacking The Equipment; Lw-401 Enclosure - Faraday LW401 Operation, Installation, And Maintenance Manual

2

INSTALLATION

Unpacking the Equipment

The LW-401 is shipped in two cartons;
one of the cartons contains the LW-401
enclosure. The other carton contains the
LW-401 electronics, the transformer, and
the mounting hardware. Follow the proce-
dure below to unpack the LW-401 equipment.
1. Locate and open the shipping carton
containing the LW41-EN enclosure.
Remove the packing material and inspect
the enclosure for damage.
Note: If the enclosure is damaged,
contact the shipping carrier
immediately to report the damage.
2. Locate and open the shipping carton
containing the LW-401 electronics.
LW-401 LW-401 Operation, Installation, and Maintenance Manual
Remove the packing material, and
inspect the electronics for damage.
Note: If the PC board is damaged,
3. Check that the following items are inside
the carton:
• Mounting hardware for the LW41-MB
and transformer
• Main board
• Power transformer
Note: If any of the above items are
Figure 3

LW-401 Enclosure

contact the shipping carrier
immediately to report the damage.
missing, contact the distributor
from whom you ordered the unit.
5