Lenovo ThinkCentre M93/p User Manual page 55

Hide thumbs Also See for ThinkCentre M93/p:
Table of Contents

Advertisement

To remove and reinstall the front bezel, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 42.
3. Release the three plastic tabs on the top of the front bezel and pivot the front bezel outward to remove
it from the computer.
Figure 13. Removing the front bezel
4. To reinstall the front bezel, align the three plastic tabs on the bottom of the front bezel with the
corresponding holes in the chassis, and then pivot the front bezel inward until it snaps into position.
Figure 14. Installing the front bezel
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 109.
.
Chapter 5
Installing or replacing hardware
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents