Camera Menu Settings - Navig8r NAVSPORTPRO User Manual

Turn On or Off. (Pre video buffers approx 5 seconds of video. When
selected, press the record button once to activate the feature. Then press a
Pre Video
second time when ready to begin recording, which includes the previous 5
seconds. Note: Cannot be used in conjunction with other time based
functions like "Video Content Loop")
The delay timer temporarily pauses the taking of a photo (for example if the
Delay Timer
person taking the photo wants to be included in the shot. Choose between
Shutter
OFF, 5, 10, or 20 seconds delay.
This function allows you to flip (invert) the LCD image by 180°. This is used
180° Photo
when the camera can only be mounted upside down. Note: This feature is
rollover
unavailable for video recording in WVGA/100fps and WVGA/120fps modes.
This feature records on the video or still picture the date and time of
Display time recording. (this watermark is permanent and cannot be removed)
Note: Excluding 1080i, WVGA/100fps and WVGA/120fps modes.

CAMERA MENU SETTINGS

For picture quality on still photos. Select between 3.0 (lower), 5.0 or 8.0MP
Resolution
(higher)
Single Shot One image is taken per shutter button press
Continuous
Three images are taken per shutter button press
capture (three)
Auto cont. Continuous image capture of 0.5,1, 2, 3, 5, 10, 20, 30 or 60 seconds until
capture stop button pressed, memory is full or battery runs flat
(also known as time lapse) Select between OFF, 3, 5 or 10 seconds. A photo
Timed shooting will be taken automatically at the preset intervals. Note: This feature must
manually be turned off afterwards
Note: The timed shooting function and other shooting functions cannot be simultaneously
enabled. Set timed shooting to OFF to restore the other shooting modes. Otherwise, the camera
is defaulted in timed shooting mode. In single shot mode, the Auto cont. capture setting is
automatically set to OFF. If Auto cont capture is set to 1s, the time display function is
unavailable.
11 | P a g e